METRON PT4000 force sensor, measuring range 0–500 N
Brand: METRON
Art.-no. 44500006
Manufacturer article no. PT4000 - 500
Individual prices for customers after login
Application
For force sensing, e.g. on tensile and compressive test machines in combination with measuring and display units, e.g. MMV 22 or MEC-9163.
Execution
- Measurement ranges from 20 kg (200 N) to 5,000 kg (50 KN)
- Steel measuring body, nickel-plated
- Cable length 6 m without connector (unconnected wires)
- 4-conductor technology (input: + red, - black, output: + green, - white)
- IP67 degree of protection
Advantage
- Very high reproducible accuracy: 0.01% of nominal value
Notes
Please note: Compatible plug for display unit and factory calibration certificate on request.
 | |
Brand | METRON |
Manufacturer Part Number | PT4000 - 500 |
Min./max. force of measuring range | 0-500 N |
Height | 63.5 mm |
Width | 51 mm |
Depth | 13 mm |
Fastening thread | M8 |
Overload limit | 1.5 x measurement range FN |
Sensitivity of force sensor | 3 mV/V |
Error limit, based on end value | 0.1% |
Min. supply voltage1 | 5 V/AC |
Max. supply voltage | 18 V/AC |
Cable length | 6 m |
Gross Weight | 0.470 kg |
Last viewed
RENNSTEIG drift punch with guide sleeve, diameter 2.4 mm
LISTA multiplex top panel (WxDxH) 2000 x 700 x 50 mm steel front edge protection
ATORN holder for cutting/turning system, 3-blade, internal, 16 mm x 16 mm, right
ATORN cutting disc f. steel and stainless steel with X-LOCK, dia. 125x1x22.23 mm
DAkkS calibration without sticker electronic long-path sensor
ANKE workbench model 348 V 1500x700x850 mm panel zinc sheet coat., RAL 7035/5010
ATORN test pin RSB TC1 12.37 mm x 70 mm
ATORN SC ball nose end mill T2, short 8x9x28x70 mm T=2 HA RockTec PRO
ATORN twist drill TLP HSSE-TiAlN, DIN 340, 4.8 mm x 132 mm x 87 mm, 130°
ATORN T-sliding block steel single M12