ORION SC end mill XL teeth=3 D 14.0 x 53 x 110mm 30 degrees HB shaft TiAlN
Brand: ORION
Surface: TiAlN
Length: 110 mm
Art.-no. 16781141
Manufacturer article no. 16781141
EAN 4053625349906
Individual prices for customers after login
Application
Universal end mill for plunge, groove and slot milling as well as for face and circumferential milling.
Execution
- solid carbide ultra-fine grain
- TiAlN-coated
- centre cutting with new point geometry
- with edge protection chamfer
- straight shank in line with DIN 6535 HB
Brand | ORION |
Main EAN Code | 4053625349906 |
Manufacturer Part Number | 16781141 |
Cutting material | SC |
Surface | TiAlN |
Type | N |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 30° |
Tool holding device | HB parallel shank |
Construction length | Long |
Cutting edge diameter | 14 mm |
Cutting edge length | 53 mm |
Length | 110 mm |
Edge protection chamfer length | 0.2 mm |
Shank diameter | 14 mm |
fz steel 1000 | 0.07 mm |
Gross Weight | 0.186 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 80-100 | 0.03-0.04 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 85-105 | 0.04-0.05 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 85-105 | 0.03-0.04 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 75-95 | 0.04-0.05 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 75-95 | 0.03-0.04 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 55-70 | 0.04-0.05 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 45-55 | 0.04-0.05 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 65-80 | 0.04-0.05 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 75-94 | 0.025-0.03 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 65-80 | 0.025-0.03 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-50 | 0.025-0.03 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 405-495 | 0.05-0.06 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 495-605 | 0.05-0.06 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 65-80 | 0.025-0.03 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 75-90 | 0.03-0.04 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 80-100 | 0.04-0.05 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 100-120 | 0.025-0.03 | ⚫ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 90-110 | 0.05-0.06 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 110-130 | 0.025-0.03 | ⚫ | |
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 110-130 | 0.03-0.04 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 100-120 | 0.025-0.03 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 90-110 | 0.03-0.04 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 45-55 | 0.025-0.03 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 30-40 | 0.025-0.03 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 30-40 | 0.025-0.03 | ⚪ |
Last viewed
LEITECH thread insert UNC 7/8-9 no go
ANKE workb., model 131 V, uni. panel 50 mm 4050 x 700 x 850 mm RAL 7035/7016
WTS hgd.-dr. cab. w. sol.sh.met.drs. w. 140 hldrs. SK 40, HxWxD 1950x1018x620 mm
HOFE shelving rack basic bay 1,000x600 mm, 7 shelves, lt grey 140 kg HKG30610AL
TESA IMICRO electronic, 50-60 mm, 0.001 mm
AMF hook wrench with pin, 12–14 mm, DIN 1810 B
HAKRO men's Mikralinar® polo shirt, red, size M
UVEX safety shoes uvex 1 x-craft pro, S1 PL, size 41
ATORN HPC POWER SC groove end mill, UNI, 16.0 x 32 x 44 x 92 mm HA, type N, long
ORION thread limit plug gauge DIN 2280 M 60x2 ISO 6H