ORION SC end mill teeth=3 diameter 3.0x8x57mm 30 degrees HA shaft TiAlN
Brand: ORION
Surface: TiAlN
Length: 57 mm
Art.-no. 16784030
Manufacturer article no. 16784030
EAN 4053625349937
Individual prices for customers after login
Application
Universal end mill for plunge, groove and slot milling as well as for face and circumferential milling.
Execution
- solid carbide ultra-fine grain
- TiAlN-coated
- centre cutting with new point geometry
- with edge protection chamfer
- straight shank in line with DIN 6535 HA
Brand | ORION |
Main EAN Code | 4053625349937 |
Manufacturer Part Number | 16784030 |
Cutting material | SC |
Surface | TiAlN |
Type | N |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 3 mm |
Cutting edge length | 8 mm |
Length | 57 mm |
Edge protection chamfer length | 0.05 mm |
Shank diameter | 6 mm |
fz steel 1000 | 0.01 mm |
Gross Weight | 0.021 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 80-100 | 0.003-0.006 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 85-105 | 0.005-0.02 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 85-105 | 0.003-0.006 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 75-95 | 0.005-0.02 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 75-95 | 0.003-0.006 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 55-70 | 0.005-0.02 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 45-55 | 0.005-0.02 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 65-80 | 0.005-0.02 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 75-94 | 0.002-0.005 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 65-80 | 0.002-0.005 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-50 | 0.002-0.005 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 405-495 | 0.01-0.025 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 495-605 | 0.01-0.025 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 65-80 | 0.002-0.005 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 75-90 | 0.003-0.006 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 80-100 | 0.005-0.02 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 100-120 | 0.002-0.005 | ⚫ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 90-110 | 0.01-0.025 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 110-130 | 0.002-0.005 | ⚫ | |
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 110-130 | 0.003-0.006 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 100-120 | 0.002-0.005 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 90-110 | 0.003-0.006 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 45-55 | 0.002-0.005 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 30-40 | 0.002-0.005 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 30-40 | 0.002-0.005 | ⚪ |
Last viewed
ORION solid carbide HPC end mill, dia. 3.0x5x50 mm, HB shaft
SUBITO VARIO SVS in case, 18–160 mm with special accessories
ATORN workpiece stop with T-shaped sliding blocks 12 and 14 mm
Ratchet strap 2 pcs 8 m x 50 mm plyest. tens. force 2,500 daN claw hook
LISTA drawer cabinet 36x36E 1450x717x725 mm KEY Lock R5012 with 9 drawers
ATORN VDE pliers set, 5 pcs, two-component handle, in case
ATORN ER25 HP collet set metallic-sealed, concentricity 5 µm
ANKE workb., mod. 207 V, panel w. zn. coating 1500 x 700 x 900 mm RAL 7035/7016
ATORN SC end mill D 10.0 x 22 x 32 x 70mm, HA shaft 3 cutting edges, ULTRA MS