ORION SC end mill teeth=3 diameter 5.0x13x57mm 30 degrees HA shaft TiAlN
Brand: ORION
Surface: TiAlN
Length: 57 mm
Art.-no. 16784050
Manufacturer article no. 16784050
EAN 4053625349951
Individual prices for customers after login
Application
Universal end mill for plunge, groove and slot milling as well as for face and circumferential milling.
Execution
- solid carbide ultra-fine grain
- TiAlN-coated
- centre cutting with new point geometry
- with edge protection chamfer
- straight shank in line with DIN 6535 HA
Brand | ORION |
Main EAN Code | 4053625349951 |
Manufacturer Part Number | 16784050 |
Cutting material | SC |
Surface | TiAlN |
Type | N |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 5 mm |
Cutting edge length | 13 mm |
Length | 57 mm |
Edge protection chamfer length | 0.08 mm |
Shank diameter | 6 mm |
fz steel 1000 | 0.02 mm |
Gross Weight | 0.022 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 80-100 | 0.006-0.02 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 85-105 | 0.02-0.03 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 85-105 | 0.006-0.02 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 75-95 | 0.02-0.03 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 75-95 | 0.006-0.02 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 55-70 | 0.02-0.03 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 45-55 | 0.02-0.03 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 65-80 | 0.02-0.03 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 75-94 | 0.005-0.015 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 65-80 | 0.005-0.015 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 40-50 | 0.005-0.015 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 405-495 | 0.025-0.03 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 495-605 | 0.025-0.03 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 65-80 | 0.005-0.015 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 75-90 | 0.006-0.02 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 80-100 | 0.02-0.03 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 100-120 | 0.005-0.015 | ⚫ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 90-110 | 0.025-0.03 | ⚫ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 110-130 | 0.005-0.015 | ⚫ | |
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 110-130 | 0.006-0.02 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 100-120 | 0.005-0.015 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 90-110 | 0.006-0.02 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 45-55 | 0.005-0.015 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 30-40 | 0.005-0.015 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 30-40 | 0.005-0.015 | ⚪ |
Last viewed
GEDORE add-on tool box for model 2000/2500, height 290 mm
MILWAUKEE M12FIW38-422X cordless impact wrench 3/8 inch
ATORN shrink-fit chuck SK40 (ISO 7388-1) dia. 6 mm A=200 mm
PIG univ. absorb. roll FAT MAT 2101, 41 cm x 51 cm, extra-heavy, 50 pc/disp. box
MarConnect connecting cable with round plug interface, cable length
BEDRUNKA HIRTH workbench 1,500x750 mm, 1x height-adjustable tray shelf
BENNING MM 4 multimeter
EROGLU shrink-fit chuck SK50-20-80
ORION thread NO-GO plug gauge DIN 2283 M 70x1.5 ISO 6H
ATORN SC torus milling cutter D 4.0 x 4 x 25 x 75mm r=0.4 T2 HA ULTRA DC-coated