ORION SC end mill teeth=3 diameter 6.0x13x57mm 45 degrees HA shaft TiAlN
Brand: ORION
Surface: TiAlN
Length: 57 mm
Art.-no. 16797560
Manufacturer article no. 16797560
EAN 4053625350100
Individual prices for customers after login
Application
Universal end mill for plunge, groove and slot milling as well as for face and circumferential milling.
Execution
- solid carbide ultra-fine grain
- straight shank in line with DIN 6535 HA
- centre cutting with new point geometry
- with edge protection chamfer
- TiAlN-coated
Brand | ORION |
Main EAN Code | 4053625350100 |
Manufacturer Part Number | 16797560 |
Cutting material | SC |
Surface | TiAlN |
Type | N |
Number of cutting edges (Z) | 3 PCS |
Twist angle | 45° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 6 mm |
Cutting edge length | 13 mm |
Length | 57 mm |
Edge protection chamfer length | 0.09 mm |
Shank diameter | 6 mm |
fz steel 1000 | 0.054 mm |
Gross Weight | 0.022 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 90-110 | 0.02-0.03 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 95-120 | 0.025-0.03 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 95-120 | 0.02-0.03 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 85-105 | 0.025-0.03 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 85-105 | 0.02-0.03 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 60-75 | 0.025-0.03 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 50-60 | 0.025-0.03 | ⚫ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 70-85 | 0.025-0.03 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 85-105 | 0.006-0.02 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 70-85 | 0.006-0.02 | ⚫ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 45-55 | 0.006-0.02 | ⚫ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 405-495 | 0.025-0.03 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 495-605 | 0.025-0.03 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 65-80 | 0.005-0.015 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 75-90 | 0.006-0.02 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 80-100 | 0.02-0.03 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 100-120 | 0.005-0.015 | ⚫ | |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 90-110 | 0.025-0.03 | ⚪ |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 110-130 | 0.005-0.015 | ⚫ | |
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 120-150 | 0.02-0.03 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 110-135 | 0.006-0.02 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 100-120 | 0.02-0.03 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 40-55 | 0.006-0.02 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 30-40 | 0.006-0.02 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 30-40 | 0.006-0.02 | ⚪ |
Last viewed
ATORN twist drill VA HSSE, DIN 340, 4.9 mm x 132 mm x 87 mm, 130°
ATORN thread cutt. inserts, full profile 60° HC5630-S 16 (ER/EL) 1.0 ISO, right
ORION cemented carbide gauge block tolerance class 1 8.00 mm
ENERPAC hydraulic pressure cylinder RC 53
ATORN Flex Mov for 5-A attachment 120/150 mm
setting ring with interm. dim. Ø 60.001-69.999 mm, type C, nominal dimension:
ANKE workbench model 255 V panel zinc sheet ctg., 1500x700x900 mm, RAL 7035/7016
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 1.3 mm
ATORN NC reamer SC T=3 B 7-8° 0.95-1.06x50x6mm HA DIN 8093, optional 0.01
ZARGES foam lining for int. dimensions: 550 x 350 x 310 mm for no. 41811/40702