ORION SC quarter circle milling cutter, 0.25 mm, concave, DIN 6535HA shaft
Brand: ORION
Surface: Uncoated
Length: 50 mm
Art.-no. 16711625
Manufacturer article no. 16711625
EAN 4039247573929
Individual prices for customers after login
Application
Quarter circle milling cutter for machining complex forms, e.g. for very small radii on bores. With reduced diameter on the radius runoff so it can be used even in confined working conditions.
Execution
- Straight shank pursuant to DIN 1636 HA
- Straight grooved
- K15 micro-fine grain
Brand | ORION |
Main EAN Code | 4039247573929 |
Manufacturer Part Number | 16711625 |
Cutting material | SC |
Surface | Uncoated |
Type | N |
Number of cutting edges (Z) | 2 PCS |
Tool holding device | HA parallel shank |
Radius | 0.25 mm |
Min. cutting edge diameter | 0.5 mm |
Max. cutting edge diameter | 1 mm |
Clearance length | 2.5 mm |
Length | 50 mm |
Clearance diameter | 1 mm |
Shank diameter | 3 mm |
fz steel 1000 | 0.005 mm |
Gross Weight | 0.006 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 70-80 | ⚫ | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 70-80 | ⚫ | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 70-75 | ⚫ | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 40-60 | ⚫ | |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 40-50 | ⚫ | |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 20-35 | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 20-35 | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 20-30 | ⚫ | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 20-30 | ⚫ | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 20-30 | ⚫ | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 20-35 | ⚫ | |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 180-200 | ⚫ | |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 150-200 | ⚫ | |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 60-70 | ⚫ | |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 60-70 | ⚫ | |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 70-80 | ⚫ | |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 150-200 | ⚫ | ||
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 70-80 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 150-200 | ⚫ | ||
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 60-80 | |||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 60-70 | ⚫ | |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 60-70 | ⚫ | |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 60-70 | ⚫ | |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 10-30 | ⚪ | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 10-30 | ⚪ | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-30 | ⚪ | |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 10-30 | ||
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 10-30 | |||
Last viewed
RÖHM collet chuck CAPTIS GTG 65 D52.0
ATORN 5-axis clamp TCA M
YOKOTA spindle-guided quick-change impact tool holder, 3/8 in to 1/2 in square
RAACO partitions, transparent 57 x 135 mm, type 150-03, 16 pieces per set
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 16.0 mm straight shank HA
RÖHM collet chuck CAPTIS GTG 65 D29.0
ATORN solid carbide drill UNI TiAlNplus 5xD without IC 7.0 mm straight shank HB
ATORN solid carbide drill UNI TiAlNplus 5xD with IC 17.3 mm straight shank HA
DAkkS calibr. micrometer set 0 to 300 mm and 11 standards
ORION SC end mill, long, T=4 3.0 x 12mm, TiAlN, type H, shaft DIN 6535HA