ORION SC torus milling cutter TiAlN T4, 10.0 mm x 72 mm, R=1.5 mm, HA shaft
Brand: ORION
Surface: TiAlN
Length: 72 mm
Art.-no. 16942021
Manufacturer article no. 16942021
EAN 4039247539055
Individual prices for customers after login
Application
HSC torus milling cutter with a short cutter for machining steels up to 1300 N/mm² and for hard milling.
Execution
- Solid carbide ultra-fine grain
- Straight shank in accordance with DIN 6535 HA
- TiAIN-coated
- With clearance
- Edge radius
- Standard design
Advantage
- specially developed coating for hard machining
- Optimised cutting geometry for plunge milling
Brand | ORION |
Main EAN Code | 4039247539055 |
Manufacturer Part Number | 16942021 |
Cutting material | SC |
Surface | TiAlN |
Type | H |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Normal |
Cutting edge diameter | 10 mm |
Cutting edge length | 13 mm |
Clearance length | 32 mm |
Length | 72 mm |
Clearance diameter | 9.2 mm |
Shank diameter | 10 mm |
Edge radius | 1.5 mm |
fz hard 65 HRC | 0.08 mm |
Product Group | 148 |
Gross Weight | 0.010 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | - | - | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | - | - | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | - | - | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | - | - | ⚪ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | - | - | ⚪ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | - | ⚪ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | - | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | - | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | - | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 80-170 | 0.08-0.09 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 75-140 | 0.06-0.07 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 75-140 | 0.06-0.07 | ⚫ | |
Last viewed
Wooden case for vernier callipers 1800 x 380 x 25 mm
PCE ultrasonic flow meter PCE-TDS 200 M with sensors
Hvy-ld pull-out sh. add-on, 3 full ext. sh. 2000x880x850mm 500kg RAL 7035/5010
QUICK knurl cutter, HSSE-PM, DIN 82 RGE 45°, left, 8.9 mm, 0.8 mm, Unidur
DINO-LITE USB hand-held microscope WF7115MZTL - Edge, 5.0 Mpix, magnif. 10x-140x
RASTERPLAN easy-view storage bins size 5, 290x140x130 mm blue
Drawer, 180 mm/130 mm, full ext., 200 kg, RAL 7035/5010 for 800 B int.: 900x700 mm
FEIN diamond saw blade with STARLOCKPLUS mount, 1 piece
TESA Proximity connecting cable - USB for dial gauge DIALTRONIC (not Compact)
