ORION end mill HSSE8 DIN 844N short 32.0 mm shank DIN 1835B
Brand: ORION
Surface: Uncoated
Length: 133 mm
Art.-no. 15176320
Manufacturer article no. 15176320
EAN 4039247091164
Individual prices for customers after login
Application
End mill for universal machining in a wide range of materials.
Execution
- HSSE Co 8
- finishing teeth
- centre cutting
- uncoated
- straight shank in accordance with DIN 1835 B
- without edge protection chamfer
Brand | ORION |
Main EAN Code | 4039247091164 |
Manufacturer Part Number | 15176320 |
Cutting material | HSSE Co8 |
Surface | Uncoated |
Type | N |
Number of cutting edges (Z) | 6 PCS |
Twist angle | 30° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 32 mm |
Cutting edge length | 53 mm |
Length | 133 mm |
Shank diameter | 32 mm |
fz steel 700 | 0.17 mm |
Gross Weight | 0.713 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 40-45 | 0.1 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 40-45 | 0.1 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 32-36 | 0.09 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 32-36 | 0.09 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-25 | 0.09 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 35-45 | 0.09 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 18-20 | 0.09 | ⚪ |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 20-25 | 0.09 | ⚪ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 14-16 | 0.09 | ⚪ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 14-16 | 0.09 | ⚪ |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 20-28 | 0.09 | ⚪ |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 180-350 | 0.09 | ⚪ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 80-90 | 0.09 | ⚪ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 30-40 | 0.09 | ⚪ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 40-50 | 0.09 | ⚪ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 40-45 | 0.09 | ⚪ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 45-55 | 0.09 | ⚪ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 120-150 | 0.09 | ⚪ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 80-90 | 0.09 | ⚪ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 80-90 | 0.09 | ||
| 3.10 Graphite | C8000 | <60 | - | |||
| 3.11 Composite materials | - | |||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 30-50 | 0.12 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 30-50 | 0.12 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 30-50 | 0.12 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 10-20 | 0.09 | ⚪ |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 10-20 | 0.09 | ⚪ |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 10-20 | 0.09 | ⚪ |
Last viewed
ATORN SC end mill long diameter 10.0 x 14 x 60 x 100mm T=4 RT52
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 15.0 mm straight shank HA
ATORN high-perf. SC drill ULTRA M HPC 3xD 5.2 mm x 6 mm x 66 mm HB internal
ATORN centre drill HSS form A 1.25 mm x 3.15 mm x 31.5 mm
steel test pin, tolerance class 1, Ø 1.23 x 70 mm
ATORN twist drill HSSE-V3 TiAlN 5XD 6.4 x 8 mm x 101 mm
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 16.0 mm straight shank HB
Factory calibration for flat ruler up to 1,000 mm
ATORN solid carbide square end mill ultra 6.80 mm shank DIN 6535HB T=3
ATORN solid carbide drill UNI TiAlNplus 5xD with IC 13.5 mm straight shank HA