ORION radius cutter T=4 long diameter 2.0 x 6 x 4 x 80 mm, HA shaft
Brand: ORION
Surface: TiSiN
Length: 80 mm
Art.-no. 16933150
Manufacturer article no. 16933150
EAN 4053625352029
Individual prices for customers after login
Application
Radius cutter in long design for machining materials up to 68 HRC, e.g. in die and mould making.
Execution
- solid carbide ultra-fine grain
- cutting edge finish
- HA shank in line with DIN 6535
- type H
- 0° chip angle
- TiSiN-coated
- Radius tolerance = +/- 0.005 mm
Advantage
- optimum chip removal and temperature resistance
- Maximum service life deu to TiSiN coating
Brand | ORION |
Main EAN Code | 4053625352029 |
Manufacturer Part Number | 16933150 |
Cutting material | SC |
Surface | TiSiN |
Type | H |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Long |
Cutting edge diameter | 2 mm |
Cutting edge length | 4 mm |
Length | 80 mm |
Shank diameter | 6 mm |
fz hard 65 HRC | 0.005 mm |
Gross Weight | 0.030 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 190-210 | 0.02 | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 190-210 | 0.02 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 190-210 | 0.02 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 180-200 | 0.025 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 140-160 | 0.012 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 100-120 | 0.01 | ⚫ | |
Last viewed
FEIN ABLK 18 1.3 CSE AS set cordless nibbler up to 1.3 mm 18 V w/o batt. 1.68 kg
HAZET 1/2 inch to 3/4 inch adapter DIN 3123
ATORN twist drill x HSSE-PM TiN, DIN 1897, 5.4 mm x 66 mm x 28 mm, 118°
ATORN SC HPC end mill diameter 16.0 x 32 x 46 x 92 mm, HA shaft
ATORN HPC POWER SC groove end mill, UNI, 15.7 x 16 x 34 x 82 mm HB, type N short
EWO lever cutting attachment with block nozzle, 17-mm shaft, for 2 - 100 mm
LESSMANN wheel brush with crimped wire 365172 steel wire bristles
DIEBOLD shrink-fit chuck, slim, HSK 50 E x 6 mm A = 90 mm
ATORN cylinder wire brush 100 mm diameter, hole 20 mm crimped V2A wire 0.3 mm
DAkkS calibration without sticker micrometer 100–300 mm