ORION revolving centring point NC MK 4

Name: ORION revolving centring point NC MK 4
Brand: BRUCKNER
SKU: 22128040
Price: 520 EUR
Availability: InStock

Brand: BRUCKNER

Art.-no. 22128040

Manufacturer article no. 33.058-4

All versions

Specification

Application

Developed for use on NC machines but also suitable for all other lathes.

Execution

60°/40° moving point.
Draw-off thread hardened and precision-ground.
Hard-wearing precision bearings for absorbing radial and axial forces.
For high rotation speeds.

Advantage

Long service life.
Concentricity guaranteed with test report.
TOP SEALING SYSTEM provides 3-way protection against coolant for the bearings.
Maintenance-free owing to permanent lubrication.

Notes

Dependent on weight of workpiece. TOP-SEALING-SYSTEM: 1. The coolant does not immediately reach the sealing ring, it rather flows with reduced energy into the first labyrinth duct. 2. There, the majority of the coolant is drained through the first drain bore. 3-4. The small remaining quantity is scraped by the sealing ring to the second labyrinth duct and exits through the second drain bore.

Delivery

1x revolving centring point without draw-off nut.

Technical information

Brand	BRUCKNER
Manufacturer Part Number	33.058-4
Morse taper size	MK 4
Programming size (Programmiermaß A)	111 mm
Programming size for housing (Programmiermaß Gehäuse B)	76 mm
Max. workpiece weight	650 kg
Max. rotation speed	7000 rpm
Concentricity tolerance	0.005 mm
Diameter of housing (Durchmesser Gehäuse D)	58 mm
Tip diameter (Spitzendurchmesser C)	25 mm
Adapter diameter (Aufnahmedurchmesser E)	14 mm
Thread dimension (Gewindeabmessung G)	M60 x 1.5
Harmonized System Code	84662098
Gross Weight	1.983 kg

Documents/CAD data

Product information

CAD data (available after login)

Certificates/ Documents (1)

Data sheet

Accessory

Additional accessory:

Product

Description

Quantity

Price per

Price

BRUCKNER draw-off nut for NC point, thread M 60 x 1.5

Draw-off nut

BRUCKNER

Art.-no. 22128130

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.