LET´S WORK TOGETHER.   Welcome to HAHN+KOLB France | For commercial customers only
BRUCKNER

ORION revolving centring point NC MK 5

Brand: BRUCKNER

Art.-no. 22128050

Manufacturer article no. 33.076-5


Individual prices for customers after login

You need more information or have not found your desired product?

Application

Developed for use on NC machines but also suitable for all other lathes.

Execution

  • 60°/40° moving point.
  • Draw-off thread hardened and precision-ground.
  • Hard-wearing precision bearings for absorbing radial and axial forces.
  • For high rotation speeds.

Advantage

  • Long service life.
  • Concentricity guaranteed with test report.
  • TOP SEALING SYSTEM provides 3-way protection against coolant for the bearings.
  • Maintenance-free owing to permanent lubrication.

Notes

Dependent on weight of workpiece. TOP-SEALING-SYSTEM: 1. The coolant does not immediately reach the sealing ring, it rather flows with reduced energy into the first labyrinth duct. 2. There, the majority of the coolant is drained through the first drain bore. 3-4. The small remaining quantity is scraped by the sealing ring to the second labyrinth duct and exits through the second drain bore.

Delivery

1x revolving centring point without draw-off nut.

Product information
CAD data (available after login)

Certificates/ Documents

 | 

 | 

Brand

BRUCKNER

Manufacturer Part Number

33.076-5

Morse taper size

MK 5

Programming size (Programmiermaß A)

131 mm

Programming size for housing (Programmiermaß Gehäuse B)

87 mm

Max. workpiece weight

1300 kg

Max. rotation speed

6000 rpm

Concentricity tolerance

0.005 mm

Diameter of housing (Durchmesser Gehäuse D)

76 mm

Tip diameter (Spitzendurchmesser C)

35 mm

Adapter diameter (Aufnahmedurchmesser E)

16 mm

Thread dimension (Gewindeabmessung G)

M80 x 2

Harmonized System Code

84662098

Gross Weight

4.037 kg

Additional accessory:
 
Product
Description
Quantity
Price per
Price
BRUCKNER draw-off nut for NC point, thread M 80 x 2

Draw-off nut

BRUCKNER
x 1 Piece
The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)
In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information
CAD data (available after login)

Certificates/ Documents

 | 

 | 

Technical information