LET´S WORK TOGETHER.   Welcome to HAHN+KOLB France | For commercial customers only

Special transportation: Additional transportation costs may apply for this product.

HELIOS-PREISSER

PREISSER shaft testing instrument MULTICHEK comfort

Brand: HELIOS-PREISSER

Length: 670 mm

Art.-no. 35705010

Manufacturer article no. 6060788104

EAN 4029713277666


Individual prices for customers after login

You need more information or have not found your desired product?

Application

For measurements in vertical and horizontal directions. Diameters and lengths can be measured from one clamping position. Saves multiple manual measuring aids when used with a height measuring device. Can also be used for testing radial run-out when used with a stand (see accessories). Taper angle and straightness of surface lines can also be measured.

Execution

  • Hardened steel measuring beam
  • Vertical and horizontal contact faces arranged at 90°
  • Vertical base plate with 3 hardened supporting surfaces (alignable)
  • Moveable tailstock with hardened, ground clamping tip diameter ∅ 16 mm x 60°
  • Fixed centre tip ∅ 24 mm x 60°, hardened and ground

Delivery

Basic beam with fixed vertical base plate, fixed tip, Ø 24 mm, 1 centre cradle (without stand)

Product information

Certificates/ Documents

 | 

 | 

Brand

HELIOS-PREISSER

Main EAN Code

4029713277666

Manufacturer Part Number

6060788104

Length

670 mm

Max. point width

550 mm

Point height

75 mm

Groove width

10 mm

Base plate length x base plate width

200 x 120 mm

Weight

32 kg

Gross Weight

31 kg

Additional accessory:
 
Product
Description
Quantity
Price per
Price
labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

x 1 Piece
PREISSER vee blocks, contact face 20 mm, T-groove 10 H7

Vee blocks

HELIOS-PREISSER
x 1 Pair
PREISSER roller blocks, contact face 20 mm, T-groove 10 H7

Roller blocks with ball bearings

HELIOS-PREISSER
x 1 Pair
PREISSER attachment stand with guide rail

Measuring stand with guide rails

HELIOS-PREISSER
x 1 Piece
The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)
In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information
CAD data (available after login)

Certificates/ Documents

 | 

 | 

Technical information