Plug gauge OD for blind holes, range diameter 170.1-180 mm nominal diameter

Name: Plug gauge OD for blind holes, range diameter 170.1-180 mm nominal diameter
Brand: SCHWENK
SKU: 33566180
Price: 1301.4 EUR
Availability: InStock

Brand: SCHWENK

Art.-no. 33566180

Manufacturer article no. 31500501

All versions

Specification

Application

For quick comparison measurements of bores during series inspections.
The slightly undersized, ground sleeve is used to guide and centre the plug gauge in the bore.

Execution

Cemented carbide measuring contacts and measuring needles (wear-resistant)
Plug gauge from dia. 130 mm can be supplied as a cross-shaped sleeves or cross-shaped sleeves with skids
Version for blind holes with reduced face size

Advantage

Easy to use
Minimum measuring times
Maximum measuring accuracy
Robust and reliable
Adapted to the desired bore diameter and tolerance

Notes

In order to carry out measurements, an additional device holder no. 33561, a display unit (dial gauge, precision pointer or inductive measuring probe) and an adjustment tool are required. Please indicate the required diameter, measuring height and tolerance when ordering. Surcharge for tolerance range below 9 µm or above 200 µm on request.
Version for through holes with enlarged front dimensions available on request
For diameters below 15 mm, the maximum measuring depth cannot be increased via the device holder or via standard measuring depth extensions.

Technical information

Brand	SCHWENK
Manufacturer Part Number	31500501
Design of measuring contact	Carbide
Min./max. diameter of measuring range	170.1-180 mm
Measurement travel	0.2 mm
Front size	1.2 mm
Repeat accuracy	2 µm
Sleeve length	55 mm
Connection thread	M11 x 0.75
Harmonized System Code	90179000
Gross Weight	2.350 kg

Documents

Product information

Certificates/ Documents (1)

Data sheet

Accessory

Additional accessory:

Product

Description

Quantity

Price per

Price

MELUTEC

Art.-no. 30003103

x 1 Piece

MELUTEC

Art.-no. 30004149

x 1 Piece

MELUTEC

Art.-no. 30005103

x 1 Piece

SUBITO OD instrument holder, 145 mm long, rod diameter 180 mm

Holder for plug gauges OD

SCHWENK

Art.-no. 33561025

x 1 Piece

SUBITO OD instrument holder, 235 mm long, rod diameter 180 mm

Holder for plug gauges OD

SCHWENK

Art.-no. 33561031

x 1 Piece

TESA GT 22 electronic length measuring probe -1.2/+3 mm inst. lngt 47 mm 0.63 N

Electronic length measuring probe with half bridge

TESA TECHNOLOGY

Art.-no. 39655022

x 1 Piece

labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

Art.-no. 30000887

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.