TESTO TE type T temperature sensor 0628 7533, measuring range -50 to +250 deg
Brand: TESTO
Art.-no. 46108210
Manufacturer article no. 0628 7533
EAN 4029547006838
Individual prices for customers after login
Application
The built-in temperature sensor with flattened tip can be used for measurements in liquids and paste-like media as well as for measurements in air. The acid-resistant stainless steel sleeve can also be used for measurements in the food sector.
Notes
The response time t99 (time until the sensor displays 99% of the temperature jump) of this sensor of 20 seconds refers to measurements in moving water at +60 °C. This response time is extended if, for example, measurements are performed in stationary liquid, paste-like media or in air. For air temperature measurements, the response time is 40 to 60 times higher than the specified value measured in water.
Brand | TESTO |
Main EAN Code | 4029547006838 |
Manufacturer Part Number | 0628 7533 |
Sensor type | TE type K |
Probe type | Built-in sensor |
Min./max. temperature measuring range | -50 to 205 °C |
Accuracy temperature | Class 2 according to EN 60584-2 |
Response time sensor | 20 s |
Diameter probe tube | 6 mm |
Length sensor tube | 40 mm |
Cable length | 1.9 m |
EN standard | 60584-1 |
Material of housing | Stainless steel |
Harmonized System Code | 90251900 |
Product Group | 4CF |
Gross Weight | 0.090 kg |
Last viewed
ATORN solid carbide drill UNI TiAlNplus 5xD with IC 5.1 mm straight shank HA
FETRA ESD Euro crate trolley 9383, open frame, 300 kg, load area 1,240x610 mm
ATORN SC TiAlSiN HPC hard drill 5xD 10.0 mm x 10 mm x 103 mm, HA shaft, with IC
ATORN twist drill TLP HSSE-TiAlN, DIN 1897, 6.5 mm x 70 mm x 31 mm, 130°
ATORN clamp holder AME-R 25-ADE04-K-T25
ORION high-perf. drill, SC TiAlN, HPC 5xD 8.1 mm x 10 mm x 103 mm HB external
ATORN twist drill TLP HSSE TiAlN, DIN 338, 1.8 mm x 46 mm x 22 mm, 130°
ATORN ER25 UP collet dia. 15.0 mm sealed, concentricity 2 µm
ATORN SC mini torus milling cutter dia. 1.5x2x25x55 mm r=0.15 T2 HA 3 ULTRA DC
ORION SC torus milling cutter TiAlN T4, 3.0 x 50 mm, R=1.0 mm, shaft HA