Test pin, steel, tolerance class 1, dia. 8.6 x 70 mm - T1 individual test pin

The images are examples.

Test pin, steel, tolerance class 1, dia. 8.6 x 70 mm

Name: Test pin, steel, tolerance class 1, dia. 8.6 x 70 mm
Brand: ORION
SKU: 32481860

Brand: ORION

Material: Gauge steel

Length: 70 mm

DIN: 2269

Calibration Group: AE

Art.-no. 32481860

Manufacturer article no. 32481860

EAN 4039247194674

All versions

Similar products

Individual prices for customers after login

Test pin, steel, tolerance class 1, dia. 8.6 x 70 mm

Art.-no. 32481860

Quantity

Price per

Piece

You need more information or have not found your desired product?

Login/Register
Call customer service: +33 (0)1 69 19 43 90

Application

For measuring bore hole clearances, bore diameters, angularity of bores etc.

Execution

Ground and lapped
Hardened 60-64 HRC
Diameter of 0.300 to 0.999 mm with a length of 40 mm; from diameter 1.000 mm with a length of 70 mm
from diameter 3.00 mm: One end with 30-45° chamfer; other end deburred with diameter marking on end face
diameter from 1.5 to 2.999 mm: One end with 30-45° chamfer; other end deburred with diameter marking on outer surface
diameter from 1.00 to 1.499 mm: One end with 30-45° chamfer; other end deburred without diameter marking
up to 0.999 mm: both ends deburred, without diameter marking

Product information

HAHN+KOLB Catalogue

Certificates/ Documents

Additional accessory:

Product

Description

Quantity

Price per

Price

labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

Art.-no. 30000887

x 1 Piece

DAkkS calibration, individual test pin, 1.001-10 mm, option 1

AE calibration group for test pins

MELUTEC

Art.-no. 30003231

x 1 Piece

Factory calibration, individual test pin, 1.001-10 mm, option 1

AE calibration group for test pins

MELUTEC

Art.-no. 30004242

x 1 Piece

DAkkS calibration without sticker, individual test pin, 1.001-10 mm, option 1

AE calibration group for test pins

MELUTEC

Art.-no. 30005231

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.